Outdoor
Best Bike Phone Mounts 2026: 5 Compared
WriterPickly Editorial
Updated 2026-11-03
A bike phone mount looks simple, but the details matter: which phone sizes it takes, which handlebar diameters it clamps, and whether it grips the phone directly or needs a matching case. Check the fit before you order, because the grip and vibration claims on the listings are the sellers' own.
Quick answer
LISEN is the lowest price at $9.98 on Amazon US on November 3, 2026, and the Lamicall 1s Quick Lock is $9.99 with room for phones up to 7.2 inches. JOYROOM is $15.99, the Topeak Omni RideCase II is $33.06 and the Quad Lock Out Front V3 is $39.99.
📋How we compared
We did not mount these on a bike or ride with them ourselves. How firmly a mount holds a phone, how it copes with vibration and whether it fits your phone and handlebar depend on your own bike and phone, and we cannot test that. This comparison is built from the product titles and feature lists on the Amazon US listings, retrieved through the Amazon Creators API on November 3, 2026, plus general knowledge of phone mounts. Sizes, materials and every grip or shock claim are the sellers' own, and we have not verified them. Prices change often, so check the retailer.
💰 Lowest price: LISEN is a silicone-wrapped clamp that the listing says installs without tools in about 5 seconds. It lists phones from 4.7 to 6.8 inches up to 20 mm thick and round handlebars of 0.6 to 1.57 inches.
Top picks ↓Related articles
1★ Best Pick💰 Lowest priceLISEN Bike Phone Holder (Silicone)
Check the 4.7 to 6.8 inch phone range and the 20 mm thickness against your phone and case.
LISEN is a silicone-wrapped clamp that the listing says installs without tools in about 5 seconds. It lists phones from 4.7 to 6.8 inches up to 20 mm thick and round handlebars of 0.6 to 1.57 inches. The listing also mentions 12-month support. On Amazon US it was $9.98 on November 3, 2026.
Pros
- ✓Lowest price of the five
- ✓Tool-free install, per the listing
- ✓Takes phones up to 20 mm thick, per the listing
Cons
- ✗Phone range stops at 6.8 inches
- ✗Clamp type, so no twist-off system
2📱 Fits larger phonesLamicall Bike Phone Mount 1s Quick Lock
Confirm your phone is 6 inches or larger and not a foldable, and that the case is under 17 mm.
The Lamicall 1s Quick Lock lists phones from 6 to 7.2 inches and cases up to 0.67 inch (17 mm), with a tool-free clamp for 0.67 to 1.57 inch round handlebars. The listing describes a one-click lock, anti-slip silicone pads and a 360-degree ball joint. On Amazon US it was $9.99 on November 3, 2026.
Pros
- ✓Room for phones up to 7.2 inches
- ✓One-hand lock and unlock, per the listing
- ✓360-degree ball joint
Cons
- ✗Starts at 6 inches, so smaller phones are outside the range
- ✗Foldable phones are listed as not compatible
3🔒 Auto-lock armsJOYROOM Bike Phone Mount (Auto Lock)
Confirm the handlebar is between 0.7 and 1.34 inches and read the listing's note on foldable phones.
JOYROOM uses four arms that the listing says lock automatically with a click and release when both sides are pressed. The listing claims a 100 mph anti-shake rating and a reinforced ball joint, which are the seller's claims. It lists phones of 4.7 to 7 inches and handlebars of 0.7 to 1.34 inches. On Amazon US it was $15.99 on November 3, 2026.
Pros
- ✓Auto-lock with a click, per the listing
- ✓Phones up to 7 inches
- ✓Ball joint adjusts 360 degrees
Cons
- ✗Handlebar range tops out at 1.34 inches
- ✗Some foldables only when folded and without a case
Subscribe to our newsletter
Occasional updates and new releases — no spam.
4🧩 Case-style mountTopeak Omni RideCase II Phone Holder
Compare your phone's dimensions with the listed 16 x 7.76 x 0.82 cm before ordering.
The Topeak Omni RideCase II is a silicone and polymer holder that comes with a stem multi-mount. The listing gives a maximum phone size of 16 x 7.76 x 0.82 cm, landscape or portrait viewing and a weight of 55 g. On Amazon US it was $33.06 on November 3, 2026.
Pros
- ✓Light at 55 g, per the listing
- ✓Landscape or portrait viewing
- ✓Stem multi-mount included
Cons
- ✗Phone must fit the listed dimensions
- ✗Listing says little about handlebar sizes
5🌀 Twist-lock systemQuad Lock Out Front Bike Mount V3
You will need a Quad Lock case or adaptor for your phone; check which one on the listing.
The Quad Lock Out Front V3 pairs a twist-and-lock phone connection with a mount that can face forward or flip over the stem, for 22, 25.4, 31.8 and 35 mm handlebars. The listing mentions stainless steel hardware and says it works with Quad Lock cases and universal adaptors. On Amazon US it was $39.99 on November 3, 2026.
Pros
- ✓Twist to attach and detach, per the listing
- ✓Four handlebar sizes listed
- ✓Stainless steel hardware, per the listing
Cons
- ✗Highest price of the five
- ✗Phone needs a Quad Lock case or adaptor
Phone size and cases
LISEN lists phones from 4.7 to 6.8 inches up to 20 mm thick. Lamicall lists 6 to 7.2 inches with cases up to 0.67 inch (17 mm) and says it is not compatible with foldable phones. JOYROOM lists 4.7 to 7 inches and up to 0.71 inch thick with a case. Topeak gives a maximum phone size of 16 x 7.76 x 0.82 cm, and Quad Lock works with Quad Lock cases and universal adaptors.
Compare your phone, with its case on, against the listed range. The clamp types take the phone directly, while the Topeak and Quad Lock designs are built around a case or an adaptor.
Handlebar size and mounting
LISEN lists round handlebars of 0.6 to 1.57 inches and Lamicall lists 0.67 to 1.57 inches, both without tools. JOYROOM lists 0.7 to 1.34 inches. Quad Lock lists 22, 25.4, 31.8 and 35 mm bars and can face forward or flip over the stem, and Topeak comes with a stem multi-mount.
Measure the bar where the mount will sit, and check the listing for the diameters it supports.
Grip claims and which to start with
The listings describe a silicone wrap and anti-slip cushions (LISEN), a one-click lock with silicone pads (Lamicall), four auto-locking arms (JOYROOM) and a dual-stage lock with stainless steel hardware (Quad Lock). JOYROOM also claims a 100 mph anti-shake rating. These are the sellers' claims, and how well any of them holds depends on the road and the phone.
For a first mount, LISEN and Lamicall are within a cent of each other at about $10. Topeak and Quad Lock cost three to four times as much and suit riders who want a case or adaptor system.
Frequently asked questions
Will it fit my phone with a case on?▼
What is the difference between a clamp mount and a case-based mount?▼
How do I check my handlebar size?▼
Check the details of the products in this article
LISEN Bike Phone Holder (Silicone)$9.98Price as of 2026-11-05
Lamicall Bike Phone Mount 1s Quick Lock$9.99Price as of 2026-11-05
JOYROOM Bike Phone Mount (Auto Lock)$15.99Price as of 2026-11-05
Topeak Omni RideCase II Phone Holder$33.10Price as of 2026-11-05
Quad Lock Out Front Bike Mount V3$39.99Price as of 2026-11-05
Prices change. Check the retailer for the current price.
Comments & questions
Discussion happens on nattzy, our community forum. Sign in with Google to post — it takes a second.
Still deciding? Ask the community your own question — Post a question on nattzy ↗








